Vortex Flow Meter

$ 1,365.00$ 4,345.00

A Vortex Flow Meter is a flow measurement device best suited for flow measurements where the introduction of moving parts presents problems.  Sensitivity to variations in the process conditions are low and with no moving parts have relatively low wear compared to other types of flow meters.

Vortex flow meters operate under the vortex shedding principle, where an oscillating vortexes occur when a fluid such as water flow past a bluff (as opposed to streamlined) body. The frequency that the vortexes are shed depend on the size and shape of the body. It is ideal for applications where low maintenance costs are important. Industrial size vortex meters are custom built and require appropriate sizing for specific applications.

Description

Vortex Flow Meter

A vortex flow meter is a flow measurement device best suited for flow measurements where the introduction of moving parts presents problems.

Sensitivity to variations in the process conditions are low and with no moving parts.  As a result, they have relatively low wear compared to other types of flow meters.

A Vortex flow meter operates under the vortex shedding principle, where an oscillating vortexes occur when a fluid such as water flow past a bluff (as opposed to streamlined) body.  The frequency that the vortexes are shed depend on the size and shape of the body.

Finally, It is ideal for applications where low maintenance costs are important.  Industrial size vortex meters are custom built and require appropriate sizing for specific applications.

Vortex Flow Meter Working Principle

When the medium flows through the Bluff body at a certain speed, an alternately arranged vortex belt is generated behind the sides of the Bluff body, called the “von Karman vortex”.

Since both sides of the vortex generator alternately generate the vortex, the pressure pulsation is generated.  It is generated on both sides of the generator, which makes the detector produce alternating stress.

The piezoelectric element encapsulated in the detection probe body generates an alternating charge signal.  The signal is the same frequency as the vortex, under the action of alternating stress.

Furthermore, the signal is sent to the intelligent flow totalizer to be processed after being amplified by the pre-amplifier.  It will realize displaying instantaneous flow and cumulative flow of fluid, communicating and controlling of flow data and the microcomputer system.

In conclusion,  certain range of Reynolds number (2×10^4~7×10^6), the relationship among vortex releasing frequency fluid velocity V.

It also has a vortex generator facing flow surface width d can be expressed by the following equation:

Vortex Flow Meter Features

  • The unique isolated sensor design allows for replacement without breaking the process seal
  • Increase plant availability and reduce potential leak points with a gasket-free meter body with no moving parts
  • Eliminate downtime and maintenance costs associated with plugged impulse lines with a non-clog meter body design
  • Achieve vibration immunity with a mass balanced sensor and Adaptive Digital Signal Processing with visual filtering
  • A standard internal signal generator included in every meter simplifies electronics verification
  • All meters arrive pre-configured and hydrostatically tested, making them ready and easy to install
  • Simplify SIS compliance with available dual and quad Vortex

If the Vortex Flow Meter does not meet your application requirements pls look at another type of flow meter below

Turbine Flow Meter

Coriolis Flow Meter

Ultrasonic Flow Meter

Electromagnetic Flow Meter

Additional information

Weight 8 lbs
Dimensions 24 × 14 × 14 in
Size

1/2" (0.12-2.02 Lb/Min), 1" (0.27-5.76 Lb/Min), 1-1/2" (0.63-13.57 Lb/Min), 2" (0.52-22.36 Lb/Min), 3" (1.14-49.27 Lb/Min), 4" (1.96-84.84 Lb/Min), 6" (4.44-192.53 Lb/Min), 8" (7.69-333.38 Lb/Min), 12" (17.38-753.69 Lb/Min)

Fluid

Liquid, Gas

Pressure

150LB (200PSIG @ <400F), 300LB (635PSIG @ <400F)

Connections

Flanged, Wafer, Sanitary, Compression

Voltage

24VDC, 85-220VAC

Classification

Intrinsically Safe (EXi), Explosion Proof (EXd)

Output

4-20 MA, 0-10KHZ, 0-10VDC (Optional)

Communication Protocol

RS485, HART

Materials of Construction

SS304, SS316L

QC Test Certificate

No, Yes

Accuracy

0.2%, 0.5%

Display

Yes

Transmitter

Cumulative Flow, Instantaneous Flow, Forward Flow, Reverse Flow

Units

L/HR, L/MIN, L/SEC, M3/HR, M3/MIN, M3/SEC

Standards

ANSI, ASME, BS, JIS, DIN

Approvals

CE, CMM3, ISO

Specifications

 

Vortex Flow Meter

Process Temperature LimitsStandard: -40 to 450 FExtended: -330 to 800 FSevere -330 to 825 F
Outputs4-20maPulse OutputModbus RT
Ambient Temperature Limits-50 to 185 F
DisplayYes
Process TypeAirLiquidSteam
AccuracyGas: +/- 1%Liquid: +/- 0.65%Steam: +/- 1%

Downloads

SRSVOFT-Vortex Flow Meter Manual-2019

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.

You may also like